SEKCE D - POVRCHOVÉ INŽENÝRSTVÍ

Datum: 22.5.2024

15:00 - 15:15
D1
JEPKENS Jan
Institute of Forming Technology and Machines (IFUM), Leibniz Universität Hannover, Garbsen, Germany, EU
Influence of Deformation on the Interface Properties of Coated Fuselage Shells - VYŽÁDANÁ PŘEDNÁŠKA
15:15 - 15:30
D2
KREISLOVÁ Kateřina
SVÚOM Ltd., Prague, Czech Republic, EU
Identification of Defects on NiDi Coating
15:30 - 15:45
D3
SZYMKIEWICZ Krzysztof
Cracow University of Technology, Cracow, Poland, EU
FEM Analysis of Nitride and Hydroxyapatite Layers Formed on Titanium Alloy for Biomedical Applications
15:45 - 16:00
D4
POKUSOVÁ Marcela
Slovak University of Technology in Bratislava, Bratislava, Slovakia, EU
Plasma-electrolyte Polishing of Low Alloyed Steel 16MnCrS5
16:00 - 16:15
D5
GAVALEC Matúš
Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Trnava, Slovakia, EU
Monitoring the Corrosion Behavior of the Operated and Non-operated Material of the Main Circulation Pipe VVER 440 Type Reactor
16:15 - 16:30
D6
ORIHEL Peter
Slovak University of Technology in Bratislava, Trnava, Slovakia, EU
Evaluation of Fracture Toughness of Boride Layers on high Chromium Steels
16:30 - 16:45
D7
YENER Tuba
Sakarya University, Turkey, Sakarya, Turkey
Production and Characterization of Siliside Coating on MIRRAX ESR Alloy by Pack Cementation Method
16:45 - 17:00
D8
BEINORAS Paulius
Vilniustech, VIlnius, Lithuania, EU
Comparative Analysis of Cu-Nb Microcomposite Conductor Welding Techniques

Datum: 23.5.2024

13:30 - 13:45
D9
MOHNFELD Norman
Leibniz Universität Hannover / Institute of Forming Technology and Machines, Garbsen, Germany, EU
Characterisation of Oxide Scale Layers on Iron-Based Steels on the Nanoscale for Hot Forging
13:45 - 14:00
D10
KUDLÁČ Marek
Faculty of Materials Science and Technology in Trnava, Slovak University of Technology in Bratislava, Trnava, Slovakia, EU
Effect of Final Machining on Corrosion Properties and Stress Corrosion Cracking Susceptibility of Austenitic Stainless Steel
14:00 - 14:15
D11
ALTAY Meryem
Uludağ University, BURSA, Turkey
Effect of Overlap Ratio on Porosity and Microhardness of 42C Martensitic Stainless Steel on FGS600-3A Ductile Cast Iron in Laser Cladding Technology
14:15 - 14:30
D12
THANG Vu Dinh
Viettel aerospace institute, Hanoi, Vietnam
On the Manufacturing of Electromagnetic Radiation Absorbent Paints Using Carbon-based Materials and Polyurethane Resin
14:30 - 14:45
D13
CIEŚLAK Grzegorz
Łukasiewicz Research Network – Warsaw Institute of Technology, Warszawa, Poland, EU
Structure and Properties of Cu/carbon Phase Composite Coatings Produced by Electrochemical Reduction Method
14:45 - 15:00
D14
ALTIN Abdullah
Yuzuncu Yil University Van Meslek Yuksekokulu, VAN, Turkey
Comparison of the Results Obtained in Turning Inconel 718 Superalloy, with PVD and CVD cutting tools

Zpět